Home
Best Sellers
All best sellers

  • Banner

  • Banner

  • New

On Sale Ricoh Gen4 7PL Printhead

Rating 

The Gen4 printhead is suitable for water-based, solvent, oily, uv ink,with an integrated heater and thermistor,has two different cable lengths: 19cm long and 44cm long and a choice of hose barb ink inlet or o-ring sealed ink inlet

$644.00
Tax excluded
Quantity

Description

The Gen4 printhead is suitable for water-based, solvent, oily, uv ink,with an integrated heater and thermistor,has two different cable lengths: 19cm long and 44cm long and a choice of hose barb ink inlet or o-ring sealed ink inlet. It is also the most widely used nozzle in recent years. It not only has a long service life, but also has a very good color and fineness. The resolution can be close to the effect of Epson nozzles. Close to the original figure about 85%, suitable for the current market use of painting, relief, varnish process.

PHYSICAL:

Size - 63(W) x 63(D) x 16.2(H) mm (excluding cables)
Head materials - SST, Ni & Epoxy adhesive (Direct contact with ink)
Nozzle plate surface - Non-coated SST
Number of nozzles - 2x 192 channels
Ink inlet port - 2x dual ports
Piezo type - D33 stacked PZT
Drop ejection mode - Piston pusher with metallic diaphragm plate
Integrated electronics - Low-voltage serial to high-voltage parallel converter with 2-bit shift resistors and transmission gate outputs.
Temperature control - Integrated heater and thermistor
Operating temperature range - Up to 60 ° C

INKS:
Compatible jetting fluids - Water, solvent, oil, UV curable
Viscosity range - 10-12 cP (at operating temp.)
Surface tension - 28-35 dynes/cm

PERFORMANCE:
Native drop volume - 7 pico-liter
Drop volume range / variation - 5-25 pico-liter with grey-scale / ±10%
Drop velocity nominal / variation - 8 m/sec / ±10%
Crosstalk - 10% or less with all channels firing
Jet straightness 1 sigma - < 3.5 milli-radian from nozzle centerline
Operating jetting frequency - Native drop; Up to 30kHz / Grey-scale; Up to 20kHz
Life - 100 billion actuation’s per nozzle

Ricoh gen 4 printhead specification
Size
63 (W) * 63 (D) * 16.2 (H) mm (excluding cables)
Head Materials
SST, Ni & Epoxy adhesive ( direct contact with ink)
Nozzle plate surface
Non-coated SST
Number of nozzles
2 * 192 channels
Nozzle Spacing
A: With a row (color)
B: Row to row offset
C: Row to row distance
0.1693 mm (1/150'')
0.0846 mm (1/300'')
0.5292 mm
Ink injet port
2x dual ports
Piezo type
D33 stacked PZT
Drop ejection mode
Piston pusher with metallic diaphragm plate
Intergrated electronics
Low-voltage serial to high-voltage parallel converter with 2-bit shift resistors and transmission gate outputs.
Temperature control
Intergrated heater and themistor
Operating temperature range
Up to 60 ℃
Inks
Compatible jetting fluids
Water, solvent, oil, uv curable
Viscosity range
10-12 cP (at operating temp.)
Surface tension
28-35 dynes/cm
Performance
Native drop volume
7 pico-liter
Drop volume range / variation
5-25 pico-liter with gre-scale /±10%
Drop velocity nominal / variation
8 m/sec /±10%
Crosstalk
10% or less with all channels firing
Jet straightness 1 sigma
< 3.5 milli-radian from nozzle centerline
Operating jetting frequency
Native drop; up to 30kHz / Grey-scale; up to 20 kHz
Life
100 billion actuation's per nozzle
Product Details
111 Items

Notify me when available
Reviews
Write your review

Write your review

Original Kyocera KJ4A AA Printhead - (600 dpi - 20KHz) Use For UV ink

On Sale Ricoh Gen4 7PL Printhead

The Gen4 printhead is suitable for water-based, solvent, oily, uv ink,with an integrated heater and thermistor,has two different cable lengths: 19cm long and 44cm long and a choice of hose barb ink inlet or o-ring sealed ink inlet

Write your review
16 other products in the same category:
New JV33 Y Motor Assy (without... Quick view

Brand: Mimaki

JV33 Y Motor Assy (without pulley) - E300451

Review(s): 0

This Y-Axis Motor Assy without pulley is suitable for Mimaki JV33 series, JV4 series printers. This is the original Mimaki part (number E300451 replacing E300295). The same motor with pulley is available as part number PMOMIJV3303 (Mimaki part number M011924). SKU: E300451 Manufacturer part number: E300451

Price $260.00
More
In stock
New On sale! Mimaki JV33 / JV5 Print... Quick view

Reference: JV33

Brand: Mimaki

Mimaki JV33 / JV5 Print Head - M007947

Review(s): 1

This original Mimaki JV33/JV5 printhead is suitable for the Mimaki solvent printer series. The Mimaki JV33/JV5 printhead has a native resolution of 1440dpi, 8 nozzle lines (corresponding with 8 independent ink channels) and 180 nozzles per line.

Price $529.00
More
In stock
New On sale! On Sale Xaar 1001 GS12/GS6... Quick view

Brand: Xaar

On Sale Xaar 1001 GS12/GS6 Printhead

Review(s): 0

The Xaar 1001, available in two drop size variants, is a unique piezoelectric drop-on- demand printhead that delivers unrivalled reliability for single-pass printing applications such as labels, packaging, ceramics, advanced manufacturing and other product decoration.  The Xaar 1001 printhead combines Xaar’s TF Technology  and Hybrid Side Shooter™...

Price $651.00
More
In stock

Follow us on Facebook

Facebook